New Teknamotor Skorpion 160 R wood chipper
Ostrowiec Świętokrzyski
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 41 263 ...
Show
+48 41 263 68 23
+48 41 263 ...
Show
+48 41 263 69 13
Poland 
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Sokołów Podlaski
Poland, Opalenica
Poland, Mogilno
Poland, Podegrodzie
Poland, Słupia
Poland, Słupia
This model’s cutting system is made by a disc equipped with two cutting blades, co-working with two counter knives. The cutting knives life has been optimized by their double-sided sharpening, which allows them to be rotated by 180°, resulting in twice the length of their use. All the knives are made of appropriately selected tool steel and subjected to professional heat treatment. In addition, the chipper disc also fulfills the task of a fan and ejects the produced chips through the ejection tube, which can be positioned in any direction at a full 360° radius.
The chipper has a three-point suspension system and is designed to work with an 60 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.
Its feed system consists of two pulling rollers, driven by separate hydraulic motors from a hydraulic pump mounted on the chipper. There is also a possibility of equipping the chipper with a unit for receiving the hydraulics from the tractor.
Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.
The wood chipper equipped with an electronic No-stress system that automatically prevents overloading of the drive system by temporarily stopping the feed system. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.
Chips made by Skorpion 160 R can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks, etc., and after additional disintegrating in a mill for production of pellets and briquettes.
Overall dimensions (LxWxH) 2,32 x 1,85 x 2,32 [m]
Weight 640 [kg]
Branch diameter 160 [mm]
No of knives 2 cutting + 2 counter-knife
Feeding speed up to 33 [running meters/min]
Chipping capacity up to 12 [stère meters/h]
Chip width from 9 to 11 [mm]
Feeding unit - hydraulic feeder
Disk diameter 550 [mm]
Hopper dimensions (WxH) 285 x 165 [mm]
Min. power of tractor 60 [hp]
Equipment included:
•PTO shaft
•Independent hydraulic system
•Adjustment of height of ejecting the chips
•Rotary chimney 360°
•No-stress system
Additional accessories on request:
•Extension of the ejection tube
show contacts